Description

• Beam shaping technology: Sculpfun S9 engraving machine adopts the latest 5.5W shaping technology diode, it has an ultra-fine 0.06mm focus, with super cutting penetration and fineness, the thickest can cut 15mm thick wood, 10mm acrylic, engraved ceramic and stainless steel.
• Fast fixed focus design: Sculpfun S9 cutting machine has the fastest focus design on the market. The S9 combines a fixed focus lens and a sliding design. You only need to slide and tighten the screws to complete the focus. This makes the use very simple.
• Extensive compatibility: Sculpfun S9 engraver cutter is compatible with various mature engraving software, such as for LaserGRBL, for LightBurn, for Benbox, for GrblController, for LiteFire, supports PWM mode engraving, supports Windows system, MAC system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.
• 32-bit automatic air assist motherboard: The air pump is a DC 12V air pump, which is directly turned on and off by the main board, and is compatible with LightBurn, and the automatic air pump is controlled on and off by the M8 air assist switch of the LightBurn software. It can effectively solve the problem of air-assisted yellowing wood boards. Cutting/air assisted opening, engraving/air assisted closing can be realized.
• Honeycomb Working Table for cutting: 400x400mm working area, after using the cutting workbench to cut wood, acrylic and other materials, the edges of the wood are neat and clean, and it is not easy to be yellowed by smoke, and a clean cutting work can be obtained. At the same time, the desktop can be protected.